Ranger Exhaust

img100_2008.JPG (227940 bytes) img100_2004.JPG (117115 bytes) img100_2005.JPG (124494 bytes) img100_2006.JPG (127302 bytes) img100_2007.JPG (131322 bytes)

I've wanted to do the exhaust on the truck for a long time and finally got around to it.  What I did was cut the stock flange after the cat, and welded on a straight pipe followed by a Flowmaster 40 series Delta flow muffler and turned the tip out toward the side of the truck in front of the rear wheel.  Because I have my rock sliders on the truck I couldn't have the exhaust exit under the bodywork so I cut a hole below the step and ran a chrome tip thru the hole.  It will look much better once I get a stainless steel trim rint to put around the opening.

Home ] Up ]